Tightform Benchtop

Tightform Benchtop


600mm deep TIGHTFORM single sided profile

Looking For A Price?

Start Designing
  • Finish/Colour: Matt Benchtop
    Smooth Benchtop
    Woodmatt Benchtop
Instruction Manual
Instruction Manual

When considering any renovation project you are looking for something to set your project apart. Why not achieve that modern contemporary look for a fraction of the cost of a granite top? If your’e after a hard-wearing benchtop at a very economical price for your next project, then look to Polytec Benchtops when you design your own kitchen.

This 600mm deep range of tops are designed for standard kitchen legs (see 900mm deep tops for an Island design). Choose a MATT colour and you will have a tight 6mm profile or a GLOSS colour for a 10mm tightform radius.

Looking for something a little more custom – no problem! We can help you with a custom made-to-order range of tops for your next project.

 

Start Designing
Technical PDF

Polytec’s range of Laminate and Bench Tops are designed for applications such as kitchen worktops, countertops, bathroom vanities and laundry bench tops where a durable decorative surface is required. Choose a MATT colour and you will have a tight 6mm profile or a GLOSS colour for a 10mm tightform radius.

Features:

  • Tough and durable
  • Resistant to cracking and chipping
  • Extensive colour range
  • Available in 33mm substrate
  • Moisture Resistant E Zero (Light weight) LDF substrate

All tops are supplied with clean square-cut raw edges for fitting and adjustment. Colour matched edge tape is provided to be installed on-site for a finish product.

On average, residents living on the eastern seaboard of Australia can expect delivery of their flat pack kitchen within 7-10 working days with Adelaide (+48 hrs) and Perth (+72hrs) having a little more time in transit.

* Please note: some custom products and colours may attract additional lead times. You will see this clearly displayed on your quote if applicable.

Due to the online ordering and custom-made nature of the products which are purchased, we are unable to offer any returns or refunds and therefore we ask you to choose very carefully before ordering.

“You press the button on our machine…”

We are very happy to assist in reviewing your design prior to ordering, both for technical as well as design advice – don’t hesitate to contact us?

In order to meet our customer’s delivery expectations around Australia we have developed a highly automated manufacturing system which means that your specific order will be immediately committed to production after your payment is confirmed through our website. This means we are unable to effect a refund if you change your mind. Again we ask, please choose very carefully before ordering.

Please contact us at Sales@Semble.com.au if require any clarification in this policy.

Semble offer a 7 Year Manufacturer’s Warranty which protects the original Purchaser of Semble products (including flat pack cabinets, doors, panels, drawer fronts, and laminate benchtops purchased in the original package), from sub-standard materials and/or substandard workmanship in the Semble product range.

This Manufacturer’s Warranty only applies to the original user and requires the Semble products to be properly maintained and used for normal domestic use. The Manufacturer’s Warranty applies for the period of 7 years from delivery of the Semble products.

The Manufacturer’s Warranty does not cover defects caused by any of the following:

1. Wear and tear suffered through normal use (including scratches and cuts) or damage caused by impacts or accidents.

2. Incorrect or negligent installation, construction, storage or assembly.

3. Installation contrary to instructions provided.

4. Deliberate mistreatment, negligent use or misuse.

5. Insufficient or improper care (including using incorrect or inappropriate cleaning products of methods). Care instructions are available online at Semble.

6. Failure to observe directions for care.

7. Fading, discolouration or damage caused by exposure to intensive or excessive light, moisture or heat (including excessive steam on doors, panels, drawer fronts and cabinets).

8. Alterations, modifications or use of the Semble Flat Pack Kitchens products which are beyond or in a way which is inconsistent with the supplied product instructions and which have not been authorised by Semble (Kitchen Brands Pty Ltd).

9. Any alteration of Semble products caused by repairs.

10. Any damage relating from moisture or exposure to water.

After More Information?

Call Us Email Us Frequently Asked Questions

Nothing is easier than the Semble Kitchen Builder

Start Designing

Still Not Sure? Request A Sample Kit

Nothing beats the real thing, so we send all our Semble master designers (that’s you!) a free Sample Kit. The kit includes examples of bench tops and colours, so you can see how your new kitchen fits.

Request My Sample Kit

Get Inspired

  • This field is for validation purposes and should be left unchanged.